Accessories

Stainless Steel Housing 316L

• 2-part stainless steel housing for a single filter, consisting of body and head with clamp
• Easily perform filter replacement by loosening the sealing clamp and removing the housing head
• Few components allows for simple maintenance, and easy operation
• Lightweight housing can be cleaned by a washing machine
Petri Dishes
• Polystyrene dishes suitable for culturing microorganisms on 47mm diameter membrane filters
• Convenient: Snug fit prevents drying during incubation. Squarededges and a raised ridge for ease of handling and secure stacking
• Sterile: sterilized by gamma irradiation (50 x 11) or by EtO (larger sizes)
• Standard sizing: 50 x 11 mm polystyrene dishes fit all commercially available aluminum block incubators
• Available with or without pad: 47 mm absorbent cellulose pad(0.85 ± 0.17 mm thick, absorbs 1.8-2.2 mL liquid)
Mesh Separators
• Prevent pore blinding by placing a mesh separator between two membranes in series
• Improve performance: Increase liquid flow rate and throughput
• Mesh Size: 28 mesh
Vacuum Pressure Pump
• Maintains continuous vacuum for filtration
• Also can be used for positive pressure filtration (max.60 psi)
• Oil free operation minimizes aerosol contamination
• Quiet operation• Easy to maintain
• Portable compact design
Stainless Steel Vacuum Manifolds 3/6 Stations
• Autoclavable
• 2-way or 3-way valve available, use a 3-way valve when the manifold is used under closed conditions and must be vented to atmosphere without breaking the vacuum connection. 3-way valve vent is female luer slip, accepts standard disposable syringe filter or stainless steel syringe filter holder
• Standard cup accepts a stopper to adapt microanalysis units and other devices
• Exterior taper accepts a 40/35 female joint
• Sterility Test Manifold features rear mounted flushing manifold for use in USP bacteria retentive method
Sterility Test Device
Integrity Test Detector
Filtration Glassware